unisonic technologies co., ltd udt1605 preliminary npn epitaxial silicon transistor www.unisonic.com.tw 1 of 3 copyright ? 2014 unisonic technologies co., ltd qw-r208-048.c 120v npn silicon high voltage darlington transistor ? description the utc udt1605 is an npn darlington transistor. utilizing utc?s advanced techonology, udt1605 features ultra-high dc current gain and low collector-emitter saturation voltage, making it suitable for efficient driving functions. the utc udt1605 is suitable for a variety of efficient driving functions, etc. ? features * high breakdown voltage * low saturation voltage * ultra-high dc current gain ? symbol ? ordering information ordering number package pin assignment packing 1 2 3 udt1605g-ab3-r sot-89 b c e tape reel note: pin assignment: e: emitter b: base c: collector udt1605g-ab3-r (1)packing type (2)package type (3)green package (1) r: tape reel (2) ab3: sot-89 (3) g: halogen free and lead free ? marking
udt1605 preliminary npn epitaxial silicon transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r208-048.c ? absolute maximum ratings (t a =25c, unless otherwise stated) parameter symbol ratings unit collector-base voltage v cbo 140 v collector-emitter voltage v ceo 120 v emitter-base voltage v ebo 10 v peak pulse current i cm 4 a continuous collector current i c 1 a power dissipation at t a =25c (note 1) linear derating factor p d 1 w 8 mw/c power dissipation at t a =25c (note 2) linear derating factor p d 2.8 w 22 mw/c junction temperature t j: -55~+150 c storage temperature range t stg -55~+150 c note: absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol ratings unit junction to ambient (note 1) r ja 125 c/w junction to ambient (note 2) r ja 45 c/w notes: 1. for a device surface mounted on 25mmx25mm fr4 pcb with high coverage of single sided 1oz copper, in still air conditions 2. for a device surface mounted on fr4 pcb measured at t 5 secs. ? electrical characteristics (t a =25c, unless otherwise stated) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =100 a 140 v collector-emitter breakdown voltage bv ceo i c =10ma (note) 120 v emitter-base breakdown voltage bv ebo i e =100 a 10 v collector cut-off current i cbo v cb =10v 100 na v cb =120v, t amb =100c 10 a emitter cut-off current i ebo v eb =8v 0.1 a collector emitter cut-off current i ces v ces =120v 10 a collector-emitter satu ration voltage v ce(sat) i c =250ma, i b =0.25ma (note) 1 v i c =1a, i b =1ma (note) 1.5 v base-emitter satura tion voltage v be ( sat ) i c =1a, i b =1ma (note) 1.8 v base-emitter turn -on voltage v be ( on ) i c =1a,v ce =5v (note) 1.7 v dc current gain h fe i c =50ma,v ce =5v (note) 2k i c =500ma, v ce =5v (note) 5k i c =1a, v ce =5v (note) 2k 100k i c =2a, v ce =5v (note) 0.5 transition frequency f t i c =100ma, v ce =10v, f=20mhz 150 mhz input capacitance c ibo v cb =500mv, f=1mhz 90 pf output capacitance c obo v cb =10v, f=1mhz 15 pf turn-on time t (on) i c =500ma, v ce =10v i b1 =i b2 =0.5ma 0.5 s turn-off time t (off) i c =500ma, v ce =10v i b1 =i b2 =0.5ma 1.6 s note: measured under pulsed conditions. pulse width=300s. duty cycle 2%
udt1605 preliminary npn epitaxial silicon transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r208-048.c utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
